We inform you that the C-TOP+ AS-i control units are now available.
The C-TOP+ control unit with AS-i (Actuator Sensor Interface) communication is designed for the optimal automation of INOXPA process valves.
The control is unit available for the entire range of valves supplied with C-TOP+ units (ball valve, butterfly valve, single and double seat multiway valve, etc.).
Depending on the version, the head can have up to three solenoid valves 3/2 (NC) and three sensors. The sensors are magnetoresistive, with contactless activation.
The C-TOP+ AS-i also incorporates three signalling LEDs which continuously indicate the status of the valve, and one flashing red LED to alert in case of signal loss.
The standard version complies with V3.0 specifications (62 slave addresses), control units that comply with V2.0 specifications (31 slave addresses) can be manufactured upon request.
01/12/2020
02/11/2020
13/07/2020
18/06/2020
13/05/2020
31/03/2020
10/12/2019
27/11/2019
21/11/2019
24/10/2019
03/10/2019
09/09/2019
18/07/2019
13/06/2019
06/06/2019
29/05/2019
04/04/2019
18/12/2018
14/12/2018
08/10/2018
25/09/2018
06/08/2018
18/06/2018
08/06/2018
16/05/2018
11/05/2018
22/02/2018
15/02/2018
01/12/2017
07/08/2017
21/07/2017
27/06/2017
30/05/2017
29/03/2017
07/02/2017
09/01/2017
07/12/2016
28/11/2016
22/11/2016
25/05/2016
12/05/2016
29/04/2016
21/03/2016
17/02/2016
19/01/2016
28/09/2015
31/08/2015
17/06/2015
28/11/2014
17/11/2014
30/10/2014
15/10/2014
02/10/2014
19/09/2014
24/07/2014
18/06/2014
23/04/2014
03/02/2014
04/12/2013
19/11/2013
21/10/2013
25/06/2013
05/06/2013
20/05/2013
16/01/2013
25/10/2012
31/07/2012