• GO TO GLOBAL SITE
YRP (SHANGHAI) FLOW TECHNOLOGY

Shanghai 201401

China

Contact us
Cream Production

Cream Production

请求信息

Cream Production

Creams can be divided into two main groups depending on their use — pharmaceutical and cosmetic/industrial.

The difference between these types lies in the fact that pharmaceutical creams contain an active ingredient (medicinal reagent) which isadded separately, whereas the others do not

Despite this difference, however, the flow diagram provided with these instructions can nevertheless be used to explain the production process for both types.

请求信息

Cream Production

solucio

Cream production process

ALL EQUIPMENT
• Ensure that all equipment is clean and ready for use
• Check that all connections are correct

MELTING VAT ( (P1)
• Load the fats and waxes into the melting vat
• Close the loading port
• Heat to 90 ºC for 10–15 minutes
• Start agitation at the programmed rpm. Depending on the agitator and the type of material to be melted and mixed, between 50 and 150 rpm
• Once the materials have been melted and mixed, reduce the agitation speed by approx. 30% and the temperature to between 70 and 80 ºC until transfer

PRODUCTION VAT (P2)
• Add treated water pre-heated to 80ºC using a weighing system or a meter
• Maintain this temperature using the heating system
• Connect the vacuum system (if applicable)
• Start the counter-rotation agitator at the programmed rpm (approx. 10 rpm for the anchor and 80 rpm for the central shaft)
• Start the emulsifier at maximum speed
• Transfer the material melted in the melting vat (P1) in a controlled manner, ensuring that the flow is appropriate for the
type of mixture. The transfer can be performed under vacuum or using a transfer pump
• Once the transfer is complete, keep stirring the mixture for at least 10 minutes. Then, the emulsifier can be stopped
• Start cooling the production vat to 50 ºC using running water
• Once this temperature has been reached, add the additives: active pharmaceutical ingredients, flavourings,
colourings etc.These elements can be added under vacuum, using a transfer pump or manually via the designated port
• Continue cooling to 30 ºC and lower the rpm of the counter-rotation agitator to 6 rpm for the anchor and 40 rpm for the central shaft
• Any volatile components should be added to the mixture at this point
• Keep agitating the product at this temperature until transfer to the finished product vat (P3)

FINISHED PRODUCT
• Heat the vat to 30 ºC using the heating system
• Switch the agitator on at approximately 10 rpm
• Transfer the product from the production vat (P2) to the finished product vat (P3). This transfer can be performed
under vacuum or using a transfer pump
• If necessary due to the viscosity or other properties of the product, the production vat (P2) can be pressurised with nitrogen to a maximum of 2 bar.

FILLING
• Filling should be performed from the finished product vat using a transfer pump.
• It is recommended to install a SIL PIG system in the line. This allows any product remaining in the pipeline which lead from the transfer pump to the entry to the filling system to be recovered, thereby helping to clean the line.

文件

操作原理

Cream production process

ALL EQUIPMENT
• Ensure that all equipment is clean and ready for use
• Check that all connections are correct

MELTING VAT ( (P1)
• Load the fats and waxes into the melting vat
• Close the loading port
• Heat to 90 ºC for 10–15 minutes
• Start agitation at the programmed rpm. Depending on the agitator and the type of material to be melted and mixed, between 50 and 150 rpm
• Once the materials have been melted and mixed, reduce the agitation speed by approx. 30% and the temperature to between 70 and 80 ºC until transfer

PRODUCTION VAT (P2)
• Add treated water pre-heated to 80ºC using a weighing system or a meter
• Maintain this temperature using the heating system
• Connect the vacuum system (if applicable)
• Start the counter-rotation agitator at the programmed rpm (approx. 10 rpm for the anchor and 80 rpm for the central shaft)
• Start the emulsifier at maximum speed
• Transfer the material melted in the melting vat (P1) in a controlled manner, ensuring that the flow is appropriate for the
type of mixture. The transfer can be performed under vacuum or using a transfer pump
• Once the transfer is complete, keep stirring the mixture for at least 10 minutes. Then, the emulsifier can be stopped
• Start cooling the production vat to 50 ºC using running water
• Once this temperature has been reached, add the additives: active pharmaceutical ingredients, flavourings,
colourings etc.These elements can be added under vacuum, using a transfer pump or manually via the designated port
• Continue cooling to 30 ºC and lower the rpm of the counter-rotation agitator to 6 rpm for the anchor and 40 rpm for the central shaft
• Any volatile components should be added to the mixture at this point
• Keep agitating the product at this temperature until transfer to the finished product vat (P3)

FINISHED PRODUCT
• Heat the vat to 30 ºC using the heating system
• Switch the agitator on at approximately 10 rpm
• Transfer the product from the production vat (P2) to the finished product vat (P3). This transfer can be performed
under vacuum or using a transfer pump
• If necessary due to the viscosity or other properties of the product, the production vat (P2) can be pressurised with nitrogen to a maximum of 2 bar.

FILLING
• Filling should be performed from the finished product vat using a transfer pump.
• It is recommended to install a SIL PIG system in the line. This allows any product remaining in the pipeline which lead from the transfer pump to the entry to the filling system to be recovered, thereby helping to clean the line.

材料 and 选择

Document № FA.Cremas.1_ES.pdf
Title Fabricación de Cremas
File type .pdf
Summary Las cremas se pueden dividir en dos grupos básicos: las de farmacia y las cosméticas e industriales
    Download
  • E-mail
Document № FA.Creams.1_EN
Title FA.Creams.1_EN.pdf
File type .pdf
Summary Creams can be divided into two main groups depending on their use — pharmaceutical and cosmetic/industrial.
    Download
  • E-mail
Document № FA.Crèmes.1_FR
Title FA.Crèmes.1_FR.pdf
File type .pdf
Summary Les crèmes peuvent être classées dans deux groupes principaux : les crèmes pharmaceutique et les crèmes cosmétiques et industrielles
    Download
  • E-mail
Document № FA.TermCremas.1_ES
Title Terminología para Cremas
File type .pdf
Summary Generalmente, una crema se define como una emulsión sólida o semisólida de productos grasos con un líquido caliente.
    Download
  • E-mail
Document № FA.TermCreams.1_EN
Title Cream Terminology
File type .pdf
Summary A cream is normally defined as a solid or semi-solid emulsion of fatty products in a hot liquid.
    Download
  • E-mail

Cookies政策

本网站使用 cookie. 我们使用 Cookie 来制作贴合用户需求的内容与广告、提供社交媒体功能以及分析我们的流量。我们还会与社交媒体、广告和分析合作伙伴分享您对我们网站的使用情况,这些合作伙伴可能会将此类信息与您提供给他们或他们在您使用其服务的过程中收集的其他信息相结合。但是,阻止某些类型的Cookie可能会影响您在网站上的体验以及我们可以提供的服务。 Cookies政策页面

统计数据
偏好设置
必要 (2)
偏好 (0)
统计 (7)
营销学 (11)
关于饼干

必要的cookie能够通过启用诸如网页导航和访问网站的安全领域等基本功能以使网站可用。若没有这些cookie,网站将无法恰当运行。

偏好cookie能够使网站记住更改网站行为或外观的信息,就好比您的首选语言或所在地区一样。

统计cookie能够通过收集和匿名报告信息帮助网站拥有者了解访客与网站互动的方式。

营销cookie用于对网站上的访客进行追踪。其目的是为了显示对个人用户来说相关及有吸引力的广告,因此,对于发布人和第三方广告商来说更为宝贵。

名称 提供者 目的 到期 类型
cc_cookie_accept www.inoxpa.cn 存储当前域的用户的Cookie同意状态 1 天 HTTP
PHPSESSID www.inoxpa.cn 跨页面请求保留用户会话状态。 届会 HTTP
collect Google 用于将有关访问者设备和行为的数据发送到Google Analytics(分析)。跨设备和营销渠道跟踪访客。 届会 像素点
_ga Google 注册一个唯一的ID,该ID用于生成有关访问者如何使用网站的统计数据。 2年 HTTP
_ga_# www.inoxpa.cn 由Google Analytics(分析)用来收集有关用户访问该网站的次数以及第一次和最近一次访问的日期的数据。 2年 HTTP
_gat_ Google 由Google Analytics(分析)用来限制请求率 1天 HTTP
_gid Google 注册一个唯一的ID,该ID用于生成有关访问者如何使用网站的统计数据。 1天 HTTP
fr Facebook 注册一个唯一的ID,该ID用于生成有关访问者如何使用网站的统计数据。 3个月 HTTP
_fbp Facebook 注册一个唯一的ID,该ID用于生成有关访问者如何使用网站的统计数据。 3个月 HTTP
IDE Google 由Google DoubleClick用来在查看或点击广告客户的广告之一后注册和报告网站用户的行为,目的是衡量广告的效果并向用户展示目标广告。 1 天 HTTP
ads/ga-audiences Google Google AdWords使用此工具重新吸引可能根据访问者在各个网站上的在线行为而转化为客户的访问者。 届会 像素点
VISITOR_INFO1_LIVE YouTube 尝试估算包含集成YouTube视频的页面上用户的带宽 179天 HTTP
YSC YouTube 注册一个唯一ID,以统计用户观看过YouTube的哪些视频。 届会 HTTP
yt-remote-cast-installed YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 届会 HTML
yt-remote-connected-devices YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 持久的 HTML
yt-remote-device-id YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 持久的 HTML
yt-remote-fast-check-period YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 届会 HTML
yt-remote-session-app YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 届会 HTML
yt-remote-session-app YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 届会 HTML
yt-remote-session-name YouTube 使用嵌入式YouTube视频存储用户的视频播放器首选项。 届会 HTML
Cookies是小型文本文件,网站可以使用它们来提高用户的体验效率。法律规定,如果对本网站的运营完全必要,我们可以将Cookie存储在您的设备上。对于所有其他类型的Cookie,我们需要您的许可。本网站使用不同类型的cookie。一些Cookie是由出现在我们页面上的第三方服务放置的。您可以随时从我们网站上的Cookie声明中更改或撤回您的同意。在我们的隐私权政策中了解有关我们是谁,如何与我们联系以及我们如何处理个人数据的更多信息。请说明您的同意书ID和您就同意书与我们联系时的日期。